Table of Contents
Advertisement
Enter/Exit Programming Mode
Aztec Code Set Length 2
This feature specifies one of the bar code lengths for
length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode. Characters can be set from
0001 to 3,832 characters in increments of 0001 (pad with zeroes).
See
page 217
for detailed instructions on setting this feature.
$CAZL2
Select Aztec Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
178
DEFAULT
Aztec Code Length
Control. Length 2 is the maximum label
To configure this feature, scan the ENTER/EXIT PROGRAM-
MING MODE bar code above, then the bar code at left fol-
lowed by the digits from the Alphanumeric characters in
Appendix D, Keypad
ter(s). End by scanning the ENTER/EXIT bar code again.
~
Length 2 is 3,832 Characters
representing your desired charac-
CANCEL
QuickScan™ I QD24XX
Advertisement
Table of Contents
