I 2 Of 5 Set Length 2 - Datalogic QuickScan I QD2400 Product Reference Manual

I 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for
if in Variable Length Mode, or the second fixed length if in
check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length (only one fixed length).
Table 8 provides examples for setting Length 2. See
Table 8. I 2 of 5 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
Pad with leading zeroes to
2
yield two digits
3
4
Scan Two Characters From
5
Appendix D, Keypad
6
$CI2L2
Select I 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Ignore This
Length
00
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT I 2 OF 5 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
I 2 of 5 Length Control. Length 2 is the maximum label length
Fixed Length Mode. The length includes the bar code's
page 217 for detailed instructions on setting this feature.
EXAMPLES
4 Characters
04
'0' and '4'
~
50 = Length 2 is 50 Characters
Enter/Exit Programming Mode
14 Characters 50 Characters
14
'1' and '4' '5' AND '0'
CANCEL
50
127