Table of Contents
Advertisement
Micro QR Code
Set Length 2
This feature specifies one of the bar code lengths for
label length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode. Characters can be set
from 0001 to 0035 characters in increments of 0001 (pad with zeroes).
See
page 217
for detailed instructions on setting this feature.
$CMQL2
Select QR Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
DEFAULT
Micro QR Code Length
To configure this feature, scan the ENTER/EXIT PROGRAM-
MING MODE bar code above, then the bar code at left fol-
lowed by the digits from the Alphanumeric characters in
Appendix D, Keypad
ter(s). End by scanning the ENTER/EXIT bar code again.
~
Length 2 is 0035 Characters
Enter/Exit Programming Mode
Control. Length 2 is the maximum
representing your desired charac-
CANCEL
199
Advertisement
Table of Contents
