Otto Bock Triton side flex Instructions For Use Manual page 15

1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.
Prohibited combination possibilities
• 4R88
Limited combination options for Ottobock components
The prosthetic foot generates high moments in the ankle area. Use structural
components with higher weight limits:
Body weight [kg]
Foot size [cm]
Structural component weight limit
[kg]
2 Intended use
2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compo­
nents based upon weight and mobility grades identifiable by our MOBIS
classification information and which have appropriate modular connectors.
The product is recommended for mobility grade 3 (unrestricted
outdoor walker) and mobility grade 4 (unrestricted outdoor walk­
m°
kg
er with particularly high demands).
The table that follows shows the suitable spring stiffness of the prosthetic
foot, matching the patient's body weight and the size of the prosthetic foot.
Body weight [kg]
up to 55
56 to 75
76 to 100
101 to 125
up to up to 75
55
up to up to
26 28
≥75 ≥100
Spring stiffness
Foot size [cm]
22 23 24
1
−
up to 100
from up to
29 28
≥125 ≥125
25 26 27
2
3
4
up to
125
from up to
29 30
≥150 ≥150
28 29 30
−
15