Paradyne COMSPHERE 6800 Series Command Reference Manual page 95

COMSPHERE 6800 Series Network Management System
Page 2 for 3400/4400 Series Modems
This input form contains the following field:
Remote transmit number
Remote receive number
Local transmit number
Local receive number
Set CCN event (Required field)
2-72
Enter the Line 1 telephone number of the device to be called.
Use the following symbols to enter the appropriate pauses or codes when entering any of
the telephone numbers:
0–9 Digits 0 through 9
# Special character in PBX dialing
* Special character in PBX dialing
, 2-second pause
Enter the Line 2 telephone number of the device to be called.
Enter the Line 1 telephone number of the local device.
Enter the Line 2 telephone number of the local device.
If configuration change notification has been enabled for this device use this field to
determine whether or not this configuration change will be reported to the NMS.
Enter yes to report this change to the NMS.
Enter no to prevent this change from being reported to the NMS.
If configuration change notification has been disabled for this device, configuration
changes are not reported to the NMS regardless of what is entered in this field.
A pop-up menu is available listing valid selections.
January 1997 6800-A2-GB31-20