Paradyne COMSPHERE 6800 Series Command Reference Manual page 184

This form contains the following field:
Exception test (Required field)
Once the threshold values have been displayed/modified, the input forms for the specified test are
displayed. Enter the required input parameters for the test. Refer to the command descriptions of
individual commands for more information on these parameters.
6800-A2-GB31-20
Enter the abbreviation of the command for which the exception report is to be generated.
Valid entries are ant, cli, clo, det, dit, eet, ot, rsl, rsq, rtp, sp.
A pop-up menu is available listing valid selections.
Depending on the test specified, the input form displays (for each modem type) the failure
thresholds applicable to that test. These fields default to the threshold values specified
with the Change Exception Reporting Thresholds (chert) command. You may accept these
default values or change them. Changing the values displayed here does not affect the
values defined in the chert command. The changed values apply only to this exception
report execution.
January 1997
NOTE
2Modem/DSU Commands
2-161