Paradyne COMSPHERE 6800 Series Command Reference Manual page 56

Test type (Required field for 3900 Series modems)
Call Test Results Form
The Call Test results form lists device information for each device specified and displays a text
message indicating whether or not the call test was successful. For the 3900 Series modems the
following possible result messages may display:
The no dial tone and no ringing tone messages are displayed if the call test failed.
6800-A2-GB31-20
Enter the call test to be performed. Valid selections are as follows:
clear counter – Resets the call attempt counter within the device. The modem
will attempt to dial backup for a maximum of 10 times. At this point, the modem
must be manually commanded to dial or reset before another dial backup attempt
can be executed.
dial tone – Causes the modem to go offline and recognize a dial tone. Once a
valid dial tone is recognized, the test completes by releasing the dial line.
Leased-line operation is interrupted by this test.
ring detect – Causes the modem to look for a ring tone for a maximum of 30
seconds and terminates the test when a ring tone is detected. The modem does
not answer the inbound call while running the test, but aborts immediately.
Leased-line operation is not interrupted by this test.
Call test passed
no dial tone
no ringing tone
January 1997
2Modem/DSU Commands
2-33