Paradyne COMSPHERE 6800 Series Command Reference Manual page 66

This input form contains the following fields:
Telephone Number
Call
Strap
Set CCN event
Change Call Directory Results Form
The results form displays device information for each specified device and indicates whether or not
the command was successful executed.
6800-A2-GB31-20
For each directory displayed, overwrite the existing telephone number or specify a new
number. For 3400/4400 Series modems equipped with a DBM, the following characters
can be used when specifying a telephone number:
0–9 Number
* DTMF number *
# DTMF number #
t Tone dialing
p Pulse dialing
w or + Wait for dial tone
, Pause
space or - Separator for readability
0 Separator for readability
: Delimiter for comment
Specify a secondary directory whose telephone number entry will be used as the primary
backup number. Valid entries are from 1 through 4.
Specify a strap area to use when establishing a dial line. Valid entries are active, cust1,
cust2. A pop-up menu is available listing valid selections.
If configuration change notification has been enabled for this device, use this field to
determine whether or not this configuration change will be reported to the NMS.
Enter yes to report this change to the NMS.
Enter no (default) to prevent this change from being reported to the NMS.
If configuration change notification has been disabled for this modem, configuration
changes are not reported to the NMS regardless of what is entered here.
A pop-up menu is available listing valid selections.
January 1997
2Modem/DSU Commands
2-43