Paradyne COMSPHERE 6800 Series Command Reference Manual page 206

Mode
Modem Bit Error Rate Results Form
The results form displays device information for the device specified, the requested mode (start,
abort, display-BERT-counters, reset-BERT-counters), and the requested port.
6800-A2-GB31-20
Enter one of the following options:
start
To reset the bit error rate counter to zero and start the bit error rate test.
abort
To stop the bit error rate test.
display-BERT-counters
To display the error count while the test continues to run.
reset-BERT-counters
To display, then reset the error count while the test continues to run.
A pop-up menu is available listing valid selections.
If start or abort was specified on the input form, a text messages displays indicating
whether or not the test was successful.
If display-BERT-counters or reset-BERT-counters was specified on the input form, the
results form displays, as in Figure 2-60.
January 1997
2Modem/DSU Commands
2-183