List Directory (Lsd) - Paradyne COMSPHERE 6800 Series Command Reference Manual

COMSPHERE 6800 Series Network Management System

List Directory (lsd)

Use the lsd command to display the telephone number and the comment portion of a specified
directory for a DATAPHONE II modem's AUTOCALL dialer. To change the telephone number, or
for complete information on the fields that appear when you execute this command, refer to the
Change Directory (chd) command.
For most commands, NMS enables you to specify the destination for the command's results and
schedule its execution. If the last page of the input form cannot accommodate the Destination for
results and Schedule execution fields, an additional page is provided. For a complete description
of these fields, refer to Chapter 1, Introduction.
Access Level:
Abbreviation:
Restrictions:
Routine:
Schedule:
Related Commands: Change Directory (chd)
List Directory Input Form
This input form contains the following fields:
Device(s) (Required field)
Directory number (Required field)
2-174
Help desk, Data Technician, Manager, System Administrator
lsd
Alternate: lsdir
This command can be executed only on DATAPHONE II DDD modems.
Yes
Yes
Dial (dial)
Display Telephone Number (dstn)
Enter the device(s) for which the directory is to be listed. One or more devices may be
specified. Standard addressing format applies to the input. For information on device
addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management
System User's/System Administrator's Guide.
Specify the directory whose number should be listed. Valid entries are from 1 through 99.
January 1997 6800-A2-GB31-20