Paradyne COMSPHERE 6800 Series Command Reference Manual page 58

Page 1
This input form contains the following field:
Device (Required field)
Page 2 for COMSPHERE Device in ADp Mode
The following input form is displayed when a COMSPHERE device operating in ADp mode is
identified on the initial input form.
This input form contains the following fields:
Address (Required field)
Carrier (Display field)
Slot (Display field)
Number of device profiles to update (Required field)
6800-A2-GB31-20
Enter the device whose network address is to be changed. Standard addressing format
applies to the input. For information on device addressing, refer to Appendix D of the
COMSPHERE 6800 Series Network Management System User's/System Administrator's
Guide.
Enter the new network address for the device. The valid range of entries for
COMSPHERE 3400/4400 Series APL modems, COMSPHERE 3600 Series DSUs and
DBMs, and COMSPHERE 3800 Series DDD modems in Advanced mode is from 1
through 256. Refer to Appendix D of the COMSPHERE 6800 Series Network
Management System User's/System Administrator's Guide for valid addressing
conventions.
Displays the number of the new carrier in which the device resides.
Displays the number of the new slot location of the device.
Specify whether the profile of only the addressed device should be updated, or whether all
affected device profiles (the addressed device and downstream/associated devices) should
be updated.
Enter 1 to update only the device profile of the selected device.
Enter all (default) to update device profiles of the selected device and all of the
downstream devices.
If a 3600 Series DSU has an associated DBM, that DBM's address including the profile is
updated.
A pop-up menu is available listing valid selections.
January 1997
2Modem/DSU Commands
2-35