Paradyne COMSPHERE 6800 Series Command Reference Manual page 190

Facility restoral option
Expanded identification is given on Page 2 of the Identity results form for 3400/4400 Series
modems equipped with a DBM.
Page 2 for 3400/4400 Series Modems
This results form contains the following fields:
Receiver composite facility speed
Hardware version – slot 1 main CCA
Hardware version – memory module
Hardware version – slot 2 CCA
Hardware version – slot 3 CCA
Hardware version – front panel
DMC ROM software version
Data pump software version
Async adaptor(s) installed on ports
Eye pattern board installed (yes,no)
Firmware version – DBM
6800-A2-GB31-20
The type of facility restoration that will be used.
The current receiver composite facility speed.
The internal hardware version for the circuit card in Slot 1.
The hardware version for the internal memory module.
The internal hardware version for the circuit card in Slot 2.
The internal hardware version for the circuit card in Slot 3.
The hardware version for the device front panel.
The software version for the DMC ROM.
The software version for the data pump.
The presence of the optional async/sync adapter hardware in the system.
The presence of the optional pattern generator hardware in the system.
The firmware version of the DBM-V, if applicable.
January 1997
2Modem/DSU Commands
2-167