Paradyne COMSPHERE 6800 Series Command Reference Manual page 64

Some of these options are dial control characters which insert pauses and other special characters
within the telephone number. The following list describes these options:
For example, you can enter 9+12015551212t. The plus symbol (+) represents a 30-second pause to
wait for a secondary dial tone. The t indicates that touch-tone dialing service is being used.
For 3800 Series devices, enter a telephone number using the following characters:
6800-A2-GB31-20
* or # Special characters in PBX dialing.
(), space, or - Improve readability (ignored by the modem).
P, p, or \ Change the current dialing method to pulse dialing service.
t, T, or % Change the current dialing method to touch-tone dialing service.
+ Wait up to 30 seconds for secondary dial tone (AT&T protocol).
w or W Wait up to 30 seconds for secondary dial tone (Hayes protocol).
, 2-second pause.
/ Pause character.
\v Delimiter separating telephone number and callback directory pointer
for use with call-back security.
; Reserved for future use.
k Placed at the end of a dial string. Temporarily changes half-duplex
emulation option.
j Placed at the end of a dial string. Temporarily changes sync/async
option.
– Reserved for future use.
0–9 Number
* DTMF number *
# DTMF number #
A DTMF number a
B DTMF number b
C DTMF number c
D DTMN number d
T Tone dialing
P Pulse dialing
W or + Wait for dial tone
R Reverse dial
@ Quiet answer
! Hook flash
, Pause
Disconnect immediately (for use in calling pagers)
; Return to command mode after dialing
space or - Separator for readability
0 Separator for readability
January 1997
2Modem/DSU Commands
2-41