Paradyne COMSPHERE 6800 Series Command Reference Manual page 59

COMSPHERE 6800 Series Network Management System
Set CCN event (Required field)
Page 2 for COMSPHERE Devices in DPII Mode
The following input form is displayed when a COMSPHERE device in DATAPHONE II mode is
identified on the initial input form.
This input form contains the following fields:
DATAPHONE II mode local address (Required field)
Advanced mode address (Required field)
Carrier (Display field)
2-36
If configuration change notification has been enabled for this device, use this field to
determine whether or not this configuration change will be reported to the NMS.
Enter yes to report this change to the NMS.
Enter no (default) to prevent this change from being reported to the NMS.
If configuration change notification has been disabled for this device, configuration
changes are not reported to the NMS regardless of what is entered here.
A pop-up menu is available listing valid selections.
Enter the new local address for the device. The valid range of values for COMSPHERE
devices in DATAPHONE II mode is from 11 through 328. Refer to the user's guide for
valid addressing conventions.
When you enter a value in this field, the corresponding Advanced
mode address is displayed automatically in the Advanced mode
address field.
Enter the corresponding Advanced mode network address for the device. The valid range
of values for a 3400/4400 Series modem is from 1 through 256. The valid range of values
for a 3600 Series DSU is from 1 through 79. Refer to the user's guide for valid addressing
conventions.
When you enter a value in this field, the corresponding
DATAPHONE II mode address is displayed automatically in the
DATAPHONE II mode local address field.
Displays the number of the new carrier in which the device resides.
January 1997
NOTE
NOTE
6800-A2-GB31-20