Total tests missing
Number of unacceptable results
Number of acceptable results
Percentage of unacceptable results
Figure 2-54 is a sample of Page 2 of the Exception Reports results form for the Receive Signal
Quality (rsq) command.
6800-A2-GB31-20
Indicates the number of tests that could not be completed, or for which results were not
received.
Indicates the number of test results returned that exceeded the threshold values defined, or
for which fail indications were returned.
Indicates the number of test results returned that did not exceed the threshold values
defined, or for which pass indications were returned. The sum of the unacceptable results
and the acceptable results must equal the total number of test results returned.
Expresses the number of unacceptable results as a percentage of the total number of test
results returned.
January 1997
2Modem/DSU Commands
2-163