Paradyne COMSPHERE 6800 Series Command Reference Manual page 96

Page 2 for 3600 Series Devices
This input form contains the following fields:
Local telephone number
Set CCN event (Required field)
Change Telephone Number(s) Results Form
The Change Telephone Numbers results form lists device information for the device specified and
redisplays the phone number(s).
6800-A2-GB31-20
Enter the telephone number of the device to be called.
Use the following symbols to enter the appropriate pauses or codes when entering the
local number:
0–9 Digits 0 through 9
* or # Special characters in PBX dialing
(,), space, or - Improve readability (ignored by device)
P, p, or \ Change the current dialing method to pulse dialing
T, t, or % Changes the current dialing method to touch-tone dialing (default)
+ Allows you to wait up to 30 seconds for a secondary dial tone
(AT&T protocol)
w or W Wait up to 30 seconds for a secondary dial tone (Hayes protocol)
comma Allows you to wait 2 seconds
/ Pause character.
k Placed at the end of a dial string, temporarily changes half-duplex
emulation option
j Placed at the end of a dial string, temporarily changes the
sync/async option
: Delimiter separating the telephone number and the callback
directory pointer (for use with callback security)
If configuration change notification has been enabled for this device use this field to
determine whether or not this configuration change will be reported to the NMS. Enter
yes to report this change to the NMS.
Enter no to prevent this change from being reported to the NMS.
If configuration change notification has been disabled for this device, configuration
changes are not reported to the NMS regardless of what is entered in this field.
A pop-up menu is available listing valid selections.
January 1997
2Modem/DSU Commands
2-73