Paper Sizes - Canon TM-355 Online Manual

Paper Sizes

Rolls
Rolls that meet the following conditions are supported.
• Outer diameter is 5.9 inches (150 mm) or less •
• Inner diameter of paper core: 2 or 3 inches •
• • Printing side out
Roll Paper Width
Roll Paper Width recom-
mended for borderless
printing(*1,*2)
Minimum Paper Length
Maximum Printable Length 59 feet (18 m)
Thickness
*1:Borderless printing may not be available depending on the media type. For details on media types that
can be used for borderless printing, see "Paper Information List."
*2:You can perform borderless printing without specifying Roll Paper Width recommended for it. As
opposed to standard borderless printing, there will be a small margin on the left and right because the
paper width is set a little bit smaller than the width of the document.
Sheets
Sheets of the following sizes are supported.
Sheet Width
TM-355 / TM-350 / TM-340 / TM-5355 / TM-5350 / TM-5340 : 36.11 in. (917.0 mm) to
8.00 in. (203.2 mm)
TM-255 / TM-250 / TM-240 / TM-5255 / TM-5250 / TM-5240 : 24.02 in. (610.0 mm) to
8.00 in. (203.2 mm)
36 in Roll (914.4mm)
A0/A1 Roll (841.0mm)
B1/B2 Roll (728.0mm)
24 in Roll (609.6mm)
A1/A2 Roll (594.0mm)
B2/B3 Roll (515.0mm)
17 in Roll (431.8mm)
14 in Roll (355.6mm)
10 in Roll (254.0mm)
8.00 in. (203.2 mm)
depends on the OS and application.
3 mil (0.07 mm) to 31 mil (0.8 mm)
TM-355 / TM-350 / TM-340 / TM-5355 / TM-5350 / TM-5340 : 36.11 in. (917.0 mm) to
8.00 in. (203.2 mm)
TM-255 / TM-250 / TM-240 / TM-5255 / TM-5250 / TM-5240 : 24.02 in. (610.0 mm) to
8.00 in. (203.2 mm)
248