Lan Settings - Canon TM-355 Online Manual

LAN settings

This item is displayed by selecting Printer settings after selecting
Important
• The administrator password is required to change settings if it is enabled for changing settings using the
operation panel.
Note
• You can also display LAN settings by selecting
• Wi-Fi •
The following setting information on the Wi-Fi connection is displayed. (Some items are not displayed
depending on printer settings.)
Items
Connection
Network name (SSID)
Frequency
Wi-Fi security
Signal strength (%)
IPv4 address
IPv4 subnet mask
IPv4 default gateway
IPv4 DNS dynamic settings
IPv4 DNS host name
IPv4 DNS domain name
IPv6 link-local address
IPv6 manual address
IPv6 manual prefix length
IPv6 stateless address 1
(Setup) on the HOME screen.
(Network) on the HOME screen.
Setting
Enabled (connected) / Enabled (disconnected) / Disa-
ble
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
2.4 GHz
Disable / WPA-PSK (TKIP) / WPA-PSK (AES) / WPA2-
PSK (TKIP) / WPA2-PSK (AES) / WPA3-SAE (AES) /
WPA-EAP (AES)* / WPA2-EAP (AES)* / WPA3-EAP
(AES)*
*Supports IEEE802.1X (EAP-TLS / EAP-TTLS / PEAP)
XXX
XXX. XXX. XXX. XXX
XXX. XXX. XXX. XXX
XXX. XXX. XXX. XXX
Enable / Disable
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX
XXX
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX
294