Canon TM-355 Online Manual page 300

Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows.
▪ ▪ Optimize inbound WSD
Selecting Enable allows you to receive the WSD printing data faster.
▪ ▪ Timeout settings
Specifies the timeout length.
◦ Bonjour settings ◦
Setting items for LAN using Bonjour.
▪ Enable/disable Bonjour ▪
Selecting Enable allows you to use Bonjour to perform the network settings.
▪ Service name ▪
Specifies the Bonjour service name. You can use up to 48 characters for the name.
The factory default setting is "Canon XX-NNN" where XX-NNN is the model name of your
printer.
Note
• You cannot use the same service name as that already used for other LAN connected
devices.
◦ ◦ SNTP settings
Performs various settings for SNTP (Simple Network Time Protocol).
◦ ◦ Spanning tree settings
Enables/Disables spanning tree. Selecting Enable avoids circulating data on a network.
◦ ◦ LPR protocol settings
Enables/Disables the LPR setting.
◦ ◦ RAW protocol
Enables/Disables RAW printing.
◦ ◦ LLMNR
Specifies ON/OFF of LLMNR (Link-Local Multicast Name Resolution). Selecting ON allows the
printer to detect printer's IP address from the printer name without a DNS server.
◦ ◦ Gigabit Ethernet settings
Specifies the communication speed and communication method when using Gigabit Ethernet.
◦ ◦ Use Dedicated Port
Selects whether to use a dedicated port for a command sent from a Canon application to the printer.
Selecting ON allows you to use the dedicated port.
◦ ◦ IPP settings
▪ ▪ Enable/disable IPP
300