Canon TM-355 Online Manual page 584

Remove a Jammed Sheet
Was the paper cut before the ink dried?
Check 5
In the touch screen menu, select Paper-related settings > Advanced paper settings, and increase time in
Pause between scans or Pause between pages.
Specifying the Ink Drying Time
When printing photos and posters, are the Print target settings set correctly?
Check 6
Do one of the following.
• • In the printer driver, change the setting to Photo (Color) or Poster in Print Target.
Printing By Setting Print Purpose
• In the touch screen menu, select Printer settings > Print settings > Default print settings > Print quality •
settings > Print target, and change the setting to Photo. (This is only available when the printer driver's
Media Type is set to Auto (Use Printer Settings)).
Print settings
Is the printer driver Print Quality set to a low quality setting?
Check 7
Follow the steps below to set Print Quality to higher quality settings, and then print.
• • Windows
Change the Print Quality settings in the printer driver Advanced Settings.
Changing the Print Quality and Correcting Image Data (Windows)
• macOS •
Change the Print Quality in the printer driver Quality & Media settings.
Changing the Print Quality and Correcting Image Data
Does the paper used for printing create a lot of cutting dust?
Check 8
In the touch screen menu, set Cut-dust reduction in Advanced paper settings to ON.
Reducing Dust from Cutting Rolls
(macOS)
584