Canon TM-355 Online Manual page 562

Check that the printer power is on. Then open the Ink Tank Cover.
Check the following items for each ink. Then, if necessary, perform Deep Cleaning.
• Is there ink remaining in the tank?
• Is the ink tank attached properly?
If the Ink Lamp is not lit, remove it and attach it again.
• Did you install the ink tanks in their correct positions?
3. 3. Execute deep cleaning
Click Yes.
Print head deep cleaning starts.
4. Check the results 4.
Check the print results.
Important
• Deep Cleaning consumes a larger amount of ink than Cleaning.
Cleaning the print head frequently will rapidly deplete your printer's ink supply. Consequently, perform
cleaning only when necessary.
System Cleaning
Execute System Cleaning if the status does not improve even after Deep Cleaning is performed.
1. Select Utilities from 1.
2. Click System Cleaning 2.
Before running the system cleaning, check the following items:
Check that the printer power is on. Then open the Ink Tank Cover.
Check the following items for each ink.
• Is there ink remaining in the tank?
• Is the ink tank attached properly?
If the Ink Lamp is not lit, remove it and attach it again.
• Did you install the ink tanks in their correct positions?
In addition, System Cleaning consumes an extremely large amount of ink.
Before executing this function, check the items below. Then, if you feel it necessary, execute System
Cleaning.
• Did you use Nozzle Check to check the nozzle status and was there a problem?
• Did the status remain unchanged even after Deep Cleaning was executed?
3. Execute system cleaning 3.
Click Yes.
System cleaning starts.
Remote UI
562