Canon TM-355 Online Manual page 141

4. 4. Select printer
Select your model from the Printer list in the Print dialog.
5. Check print settings 5.
Set paper size and other items as needed.
Set paper type from the printer.
Note
• Use the Print dialog to set general print settings such as the layout and the print sequence.
For information about print settings, refer to macOS help.
• You can set Print quality settings (Color mode, Print resolution, and Print target), Paper
settings (No Top/Btm Space (Save Paper) and Unidirectional printing), and Magnification
level for borderless on the operation panel of the printer. For details, see
6. 6. Click Print
The printer prints according to the specified settings.
Note
• It can take the Wi-Fi a few minutes to get connected after the printer turns on. Print after checking
that the printer is connected to the network.
• You cannot use AirPrint if Bonjour settings of printer are disabled. Check LAN settings of printer and
enable Bonjour settings.
• Refer to "Cannot Print Using
• The display of the settings screen may differ depending on the application software you are using.
Deleting Print Job
Use Stop button from printer to cancel the print job.
Restrictions on the AirPrint
• If A2+, A3+, or 13 x 22 is selected for Paper Size in the print dialog, part of the image may not fit on
the paper.
• If printing cut sheet, the bottom edge of the image may be cut out.
• To perform borderless printing, configure settings in paper sizes. Depending on the type of paper,
print results might have slight margins on the left and right edges.
• If printing cut sheet, feed the paper vertically. If the paper is fed horizontally, it will still print vertical
images.
• When printing images with large data sizes, the color may turn out uneven. In this case, select Printer
settings -> Hard disk settings -> Save first and print -> ON on the operational panel of the printer.
• Some paper sizes that are compatible with the Canon IJ printer driver are not compatible with AirPrint.
If using these sizes, set a custom size.
• Canon imagePROGRAF Free Layout and Canon imagePROGRAF Preview cannot be used.
AirPrint" for printing problems when using AirPrint.
141
"Print settings."