Canon TM-355 Online Manual page 447

3. 3. Select Show password.
• • By selecting Wireless Direct, you can change the following settings.
Enable/disable Wireless Direct
Change network name (SSID)
Change password
Connection request confirmation
For updating the SSID / password or changing the name of the printer displayed on Wi-Fi Direct
compatible device, see
Connecting Smartphone/Tablet to Printer
1. Turn on Wi-Fi communication on Wi-Fi Direct compatible device. 1.
For more on turning on Wi-Fi communication, see your device's instruction manual.
2. Select "DIRECT-XXXX-XX-XXXX" ("X" represents alphanumeric characters.) from list 2.
displayed on device.
Note
• • If "DIRECT-XXXX-XX-XXXX" does not appear on the list, wireless direct is not enabled.
See Enable Wireless Direct
• You can change the name of the printer displayed on Wi-Fi Direct compatible devices. •
See Change Wireless Direct Connection Setting
3. 3. Enter password on Wi-Fi Direct compatible device.
The device is connected to the printer.
Note
• You can check the password set for the printer by the following method. •
1. 1. On the HOME screen, select
2. 2. Select Wireless Direct.
3. 3. Select Show password.
• • If your Wi-Fi Direct compatible device is set to prioritize using Wi-Fi Direct and it is connecting
to the printer, the printer displays a confirmation screen asking if you allow the device to
connect to the printer.
Make sure the name on the touch screen is the same as that of your Wi-Fi Direct compatible
device and select Yes.
Change Wireless Direct Connection
to enable wireless direct.
(Network).
447
Setting.
as necessary.