Canon TM-355 Online Manual page 297

Bonjour service name
*1 means printer's model name
("XX" represents alphanumeric characters.)
To change the setting, select Settings.
◦ ◦ Enable/disable Wireless Direct
Select Enable to wirelessly connect without wireless router.
◦ ◦ Change network name (SSID)
Changes the identifier (SSID/the printer's name displayed on a Wi-Fi Direct compatible device) for
Wireless Direct.
◦ ◦ Change password
Changes the password for Wireless Direct.
◦ Connection request confirmation ◦
Changes the display / non-display of the confirmation screen when Wi-Fi Direct compatible devices
are connected to the printer.
Note
• By selecting Advanced, you can set LAN in detail. •
For the items that can be set, see the following.
Advanced
• Wired LAN •
The following setting information on the Wired LAN connection is displayed. (Some items are not
displayed depending on printer settings.)
Items
Connection
IPv4 address
IPv4 subnet mask
IPv4 default gateway
IPv4 DNS dynamic settings
IPv4 DNS host name
IPv4 DNS domain name
IPv6 link-local address
IPv6 manual address
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
Setting
Enabled (connected) / Enabled (disconnected) / Disa-
ble
XXX. XXX. XXX. XXX
XXX. XXX. XXX. XXX
XXX. XXX. XXX. XXX
Enable / Disable
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX
297