Canon TM-355 Online Manual page 233

Setting the Default Value of the Amount of Roll Paper Left when Managing by the
Barcode
When you select Barcodes in Manage remaining roll amount and if you feed roll paper on which no
barcode is printed, such as new roll paper, the screen to enter the roll paper length (remaining amount)
appears.
In this screen, the length (remaining amount) of default value appears. If the length is not correct, enter a
correct length.
When you want to change the length (remaining amount) of default value, follow the steps below.
1. Select paper settings display area on Home screen. 1.
2. Select Paper settings. 2.
3. 3. Select Advanced.
4. Select Roll length (change default). 4.
5. 5. Enter roll paper length and select OK.
Managing by Estimating the Amount of Roll Paper Left
When you set the Manage remaining roll amount to Auto estimate, the remaining amount of roll paper
is estimated and displayed in the Operation panel. The barcode is not printed.
When paper runs out, the printer records the estimated remaining roll amount. Any discrepancy will be
used to make the estimated remaining roll amount more accurate the next time you load the same paper.
Important
• If the type of paper is not selected correctly, the amount of roll paper left may not be estimated •
correctly.
• There is an error in the estimated amount of paper remaining, and it may be out of paper during •
printing.
• When using the types of paper which are not displayed on "Paper Information List," set the paper •
thickness and the size of paper core with Media Configuration Tool.
233