Canon TM-355 Online Manual page 124

8. 8. Complete setting process
Click Print.
If you print now, the document will be printed without margins on three sides to fit the paper size.
9. 9. Cut the right side of the paper
Cut the margin on the right side of the paper with scissors after printing.
Cut slightly to the inside of the margin as the document is enlarged to extend slightly beyond the
specified size.
To get the document to standard size, it is recommended to take measurements and cut in the correct
positions.
Printing Full-Size without Margins on Three Sides
The procedure for three-sided borderless printing in the same size as the original document without
enlarging or reducing the size is described below.
1. Select the paper size for whole-surface borderless printing 1.
Select "XXX Borderless" from Paper Size in the
2. Select Page Processing from Printer Options 2.
3. Select roll paper width 3.
For paper roll width, enter the same value set in the printer under Roll Paper Width.
4. Place a checkmark next to Three-sided Borderless 4.
print dialog.
124