Canon TM-355 Online Manual page 829

4911
Cause
The media type specified in the printer driver is not the same as the media type loaded in the printer.
What to Do
Tap OK on the touch screen to go to the next screen.
Check the media type and size that appear and tap OK.
• • Changing the printer driver print settings
Follow the steps below to match the media type in the printer driver and the media type specified for
the printer.
1. Tap Cancel on the touch screen to stop printing.
2. Change the media type in the printer driver settings to the media type loaded in the printer, and
then try again.
• Replacing paper •
Follow the steps below to match the media type in the printer driver and the media type specified for
the printer.
1. Tap Replace the paper and print on the touch screen to stop printing.
2. 2. Load the paper with the media type set in the printer driver, and then try again.
Loading Rolls in the Printer
Loading Sheets in the Printer
• Printing without changes •
To continue printing, tap Print with the loaded paper. on the touch screen.
However, note that this error may cause paper jams and affect the printing quality.
829