Table of Contents
Advertisement
EN
WARNING:
Always lift up the squeegee at
the end of cleaning in order to
prevent the deformation of the
rubber blades.
-
Press the button (4) turning it off.
9.1.e - Warnings while using the ma-
chine (Fig. 12/a)
-
While using the machine, the occurrence
of the following errors is signalled by the
coming on of the leds.
Suction unit outlet overcurrent error
Led 1 is flashing and Led 2 is constantly
lit.
Brush unit outlet overcurrent error
Led 1 is flashing and Led 3 is constantly
lit.
Suction unit outlet open circuit error
Led 1 is flashing and Led 4 is constantly
lit.
Brush unit outlet open circuit error
Led 1 is flashing and Led 5 is constantly
lit.
When any of the above mentioned error sig-
nals is displayed, it is necessary to turn off
the machine and then turn it on again, in or-
der to set it back to normal functioning.
9.1.f - Timer (Fig. 12/a)
It is possible to visualize the working time of
the machine proceeding as follows:
-
To turn on the timer it is necessary to start
the machine by pushing the "Brush rota-
tion" button (6) and keeping it pressed.
The timer counts up to 9999 hours.
Indication of the hours of work by units:
-
one flash of Led 1 followed by as many
flashes of Led 5 as the units of hours of
work.
Indication of the hours of work by tens:
-
one flash of Led 1 followed by as many
flashes of Led 4 as the tens of hours of
work.
Indication of the hours of work by hun-
5
dreds:
-
one flash of Led 1 followed by as many
4
flashes of Led 3 as the hundreds of hours
of work.
3
Indication of the hours of work by thou-
2
sands:
-
one flash of Led 1 followed by as many
1
flashes of Led 2 as the thousands of
hours of work.
Fig. 12/a
EN-22
NOTE:
NOTE:
Advertisement
Table of Contents
