Table of Contents
Advertisement
EN
1.1.b - Consulting the manual
The manual is divided into chap-
ters according to a logical order
of knowledge and use of the ma-
chine.
For help with finding a specific
topic, first consult the CON-
TENTS shown at the beginning of
the manual.
1.1.c - Key to symbols used in
the manual
In order to highlight information
and procedures regarding safety,
maintenance etc., the following
symbols have been adopted in
the manual:
DANGER:
Warns of a serious, even fatal
danger for the safety of the op-
erator and/or third persons.
WARNING:
Extremely important informa-
tion in order to prevent serious
damage to the machine and the
environment in which it oper-
ates.
N.B.:
Additional information for correct
machine operation or of a general
nature.
1.1.d - Conventional terminol-
ogy
The terms front, rear, forward,
back, upper, lower, left and right
refer to the operator in the work-
ing position with his/her hands on
the guide handle.
To simplify, the brand name of
the model has been replaced with
"Machine".
The machine comes in two ver-
sions:
- BC: version with batteries.
- E: version with electric cable.
1.2 GENERAL
WARNINGS
Before putting into service, using
and maintaining the machine, it
is necessary for the persons in-
volved (persons in charge and
operators) to be trained regard-
ing the operating procedures and
safety standards shown in this
manual.
Respect all the provisions con-
tained in the manual and in any
enclosed documentation.
DANGER:
The machine is not intended
for use by persons (including
children) with reduced physi-
EN-4
Advertisement
Table of Contents
