Table of Contents
Advertisement
EN
-
Move the machine to the vicinity of a
main electrical socket.
-
Unwind the cable (2) and connect it to the
outlet.
WARNING:
Check that the mains voltage is
compatible with the operating
voltage of the battery charger.
-
Leave the batteries to charge until the
"Green" LED (4) comes on, then remove
the power cable (2) and wind it up in the
specific support.
N.B.:
10 hours are needed for complete battery
charging Avoid partial recharges.
WARNING:
- Make sure that the mains sys-
tem is equipped with an RCD
(circuit breaker).
- Unwind the electric power
cable completely before con-
necting it to the mains sock-
et.
- Use an electrical extension
lead only if in perfect condi-
tion; ensure that the section
is appropriate for the appli-
ance power rating.
- Never let the power cable run
over sharp edges and do not
tread on it.
- The socket must be easily ac-
cessible.
EN-14
2
1
4
Fig. 6
Advertisement
Table of Contents
