Turning On The Strip Expiration Date Indicator; Turning On The Hypoglycemia (Hypo) Indicator - i-SENS CareSens N Owner's Booklet

Turning on the Strip Expiration Date Indicator

Step 9
This mode allows you to turn the strip expiration date indicator
on or off. This mode turns the function on or off only. See page 20
to set the strip expiration date.
When "EP" blinks on the screen, press the or button. The
screen will display "On" or "OFF". Press the S button to confirm the
setting. If you do not want to set the indicator, press the S button
while the screen displays "OFF".
Note: If the pre-set expiration
date expires, the meter will
display "EP" when the test
strip is inserted. EP shows
alternately also when the test
result is displayed right after
the test.
If the expiration date is set to
October of 2019, the meter
will display "EP" at the start of
November, 2019.
18 www.i-sens.com

Turning on the Hypoglycemia (HYPo) Indicator

Step 10
This setting allows you to turn the hypoglycemia indicator
(possible low blood sugar) On or OFF and to select the desired
level for the indicator. You will be alerted any time your test
result is lower than the selected level. On pressing the or
button, the screen will display "On" or "OFF". Press the S button
when "On" appears to enter the setting. Press the or button
until the desired hypoglycemia level between 20 and 90 mg/dL
(1.1–5.0 mmol/L) appears. Press the S button to confirm the
hypoglycemia level and go to the next step.
Note:
If the test result is
lower than the pre-set
hypoglycemia level, the
meter will display the
following.
Caution: Ask your healthcare professional to help you
decide what your hypoglycemia level is before setting your
hypoglycemic level.
HYPo warning
will blink on the
left bottom corner.
www.i-sens.com 19