Setting The Strip Expiration Date Indicator - i-SENS CARESENS DUAL Owner's Booklet

Setting the Hyperglycemia (HI) Indicator
Step 13
This mode allows you to turn the hyperglycemia indicator (possible
high blood sugar) On or OFF and to select the desired level for
the indicator. You will be alerted any time your test result is higher
than the selected level. On pressing the ◀ or ▶ button, the screen
will display 'On' or 'OFF' . Press the
to enter the setting. Press the ◀ or ▶ button until the desired
hyperglycemia level between 6.7 and 19.4 mmol/L appears. Press
S
and hold the button to confirm the hyperglycemia level and
turn the meter off.
Note:
If the test result is higher than the
pre-set hyperglycemia level, the
meter will display HI on the bottom.
KETONE symbol blinks 3 times when
the result is higher than 13.3 mmol/L.
Caution:
Ask your healthcare professional to help you decide what your
hyperglycemia level is before setting your level.
28 www.i-sens.com
S
button when 'On' appears

Setting the Strip Expiration Date Indicator

Step 1 Entering the Expiration Date Setting
Press and hold the ◀ and ▶ buttons at the same time for 3
seconds to enter the expiration date settings. After all segments
flash across the screen, 'EP' will show up.
Note:
• The strip expiration date indicator functions only when
CareSens PRO test strip is inserted.
• The strip expiration date is printed on the CareSens PRO test
strip vial.
Step 2 Setting the Year
A number indicating the year will blink in the
left corner of the screen. Press the ◀ or ▶
button until the correct year appears.
S
Press the button to confirm the year and set
the month.
Step 3 Setting the Month
A number indicating the month will blink at
the bottom of the screen. Press the ◀ or ▶
Press button until the correct month appears.
S
Press and hold the button for 3 seconds to
confirm the month and turn off the meter.
www.i-sens.com 29