Table of Contents
Advertisement
Welcome...
Safety information
Failure to observe safety norms can be hazardous and might infringe
existing laws.
Connections
Always plug the phone cable connectors into the appropriate sockets. Do not
modify the connections in any way.
Power supply
Your phone can be supplied with power in various ways. Pay attention to the
information given by the system administrator.
Note:
The device will be inoperable when the mains power for the communication sys-
tem fails.
Metal objects
Telephone receivers produce magnetic fields that can attract small metallic
objects such as pins and staples. To avoid injury, do not place the handset
where such objects can be picked up.
Maintenance
• Make sure all installation and repair work is carried out by a specially qualified
technician.
• Always use a soft, moistened, or antistatic cloth to clean your device. Do not
use chemicals or other chemical products.
Cost control and data protection
1
You should protect your phone with a PIN so that no-one can make phone calls
5
20
at your expense. A code will also protect your personal settings.
Ambient conditions
• Operate the device only in the temperature range of +5 °C to approx. +40 °C.
• Avoid exposing the device to direct sunlight and other sources of heat.
• Protect your device against the moisture, excessive dust, corrosive liquids
and steam.
• Do not expose your device to electromagnetic fields (for example: electric
motors, household appliances). The speech quality could be affected.
Disposal
Be sure to dispose of your device, batteries and its packaging in an environmen-
tally compatible way. Electrical equipment does not belong in domestic waste.
Deposit it at a return center.
Accessories
Use original accessories or specifically approved accessories only. The use of
other accessories may decrease performance or pose a risk to your health or
safety.
4
Mitel 6905 SIP / Mitel 6910 SIP
Version 1.0/7.0 – R7.0 – 12.2021
Advertisement
Table of Contents
