Table of Contents
Advertisement
Phoning
Private calls:
1. Enter function code #46 for a private call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the external call number directly, without the exchange access digit.
5. Pick up the handset.
The phone is now enabled; the external user is called.
Note:
The default PIN setting '0000' is not accepted (for more information about the
PIN, see the chapter "Changing the PIN", page 77).
Automatic call waiting in case of internal user
You would like to talk to an internal user whose line is currently busy.
By using the function, Automatic call waiting
you want to talk to the user. When you use the Automatic call waiting func-
tion, the user receives a call waiting tone (duration and frequency of the
tone depend on system settings) and your phone number or name appear
on their display. The user may accept or refuse your call.
Requirements:
• Your system administrator must authorize you to use the Automatic call
waiting function in the MiVoice Office 400 communication system.
• The internal user must not have blocked the Automatic call waiting
function on their phone (see the chapter "Activating protection against
call types", page 79 for configuration).
Note:
If the user is making an enquiry call or is in a conference, the Automatic
call waiting function cannot be used.
Call waiting:
The person you want to talk to is busy. The phone automatically executes the
call waiting function.
Note:
If the user declines the call request or if the call waiting function cannot be exe-
cuted, the connection is terminated (busy tone) or the call is redirected to a pre-
defined phone, depending on the system configuration.
1)
from MiVoice Office 400 communication server software version R4.0 SP1
onwards
32
1)
, this user is informed that
Mitel 6905 SIP / Mitel 6910 SIP
Version 1.0/ – R7.0 – 12.2021
Advertisement
Table of Contents
