Mitel 6905 SIP User Manual page 35

You must save this function to a configurable key using Self Service Portal
(see the chapter "Configuring or deleting a key assignment", page 85).
Notes: • Your call number can be hidden only if you select an external call num-
ber.
• This feature depends on the range of services offered by your provider.
Activating/deactivating calling line identification restriction permanently:
Press the function key for
The function is activated/deactivated. The LED on the function key is switched
on/off (Mitel 6910 SIP only). Your phone number is hidden in all outgoing calls.
Activating CLIR per call:
1. Press the function key for
2. Enter the call number and press the
3. Call number is dialed and your number is not displayed to the called party.
Putting a call partner on hold
You want to briefly interrupt the active call.
You can put the call party on hold and then return to the call again on the
same phone.
Putting the active call party on hold:
Press the Hold key.
The call party is put on hold. The LED on the line key flashes.
Take back the call party on hold:
Press the Hold key or the flashing line key.
The call is active again.
Parking conversation partner
You want to place the person you are talking to on hold without blocking a
phone line.
You may park
again on the same phone on which you parked the person.
Mitel 6905 SIP / Mitel 6910 SIP
Version 1.0/ – R7.0 – 12.2021
Hide number.
Hide
1)
the person you are talking to and then pick up the call
number.
Enter softkey.
Phoning
35