Mitel 6905 SIP User Manual page 39

Making a conference call
You want to make a conference call.
A conference call allows you to connect three call parties. From a confer-
ence call, you can initiate an enquiry call to someone else. You can broker
between the conference participants and the enquiry call party. Depending
on the system configuration, a conference call can consist of up to six con-
ference participants. You can hold a conference call with internal and
external users.
Mitel 6905 SIP: You must save this function to a configurable key using
Self Service Portal (see the chapter "Configuring or deleting a key assign-
ment", page 85).
Note: If you have a user account for the Self Service Portal, you can create con-
ference rooms there (see the chapter "MiVoice Office 400 Self Service
Portal", page 8).
Setting up a conference (you are connected):
Press the function key for Conference.
Press the Conference key. (Mitel 6910 SIP only)
Enter the phone number of the second conference call party.
Press the
The conference party answers the call.
Press the function key for Conference.
Press the Conference key. (Mitel 6910 SIP only)
Notes: • You can also set up a conference by pressing the busy lamp field keys to
which you have saved the call party.
• You can change the procedure by first starting an enquiry call before you set
up a conference.
Leaving a conference call:
Put the handset on-hook or press the End key.
The other conference parties remain in the call.
Transferring a call
You want to put your call partner through to someone else.
Mitel 6905 SIP / Mitel 6910 SIP
Version 1.0/ – R7.0 – 12.2021
Dial softkey.
Phoning
39