Table of Contents
Advertisement
Using a softkey/navigation key
Softkeys are the keys that are automatically configured with context-
dependent functions by the MiVoice Office 400 communications system.
The functions are displayed on screen and operated with the navigation
key.
A menu can have several sub-menus. Press the
key down or right) to access the sub-menu or the selection of available
editing options or to carry out the action.
Free configurable keys
Mitel 6905 SIP: Your Mitel 6905 SIP has three freely configurable keys
that are set to the following default functions by your system administrator:
• System menu
• Call list - menu
• Call transfer
You can configure these programmable keys with another function or call
number.
Mitel 6910 SIP: Your Mitel 6910 SIP has eight freely configurable keys.
Popular functions are set for a specific configurable key by default by your
system administrator (see "Function key configuration (default key setting)
- Overview", page 18). The remaining configurable keys can be configured
with a specific action type: Call number, function, or busy lamp field.
The key configuration is not made directly on the phone. Available settings
for the key configuration:
• MiVoice Office 400 communication system: The configuration is
made by your system administrator in the communication system.
• Self Service Portal: You can use the Self Service Portal (see the chap-
ter "MiVoice Office 400 Self Service Portal", page 8) where you can
configure, change, or delete the keys.
For information about freely configurable keys, see the chapter "Configur-
ing keys", page 84.
Mitel 6905 SIP / Mitel 6910 SIP
Version 1.0/ – R7.0 – 12.2021
MiVoice Office 400 System menu
10.
Alarm melodies
11.
Software Version
Keys, display, and menu guidance
Run
softkey (navigation
17
Advertisement
Table of Contents
