Table of Contents
Advertisement
Phoning
You must save this function to a configurable key using Self Service Portal
(see the chapter "Configuring or deleting a key assignment", page 85).
Parking the active call party:
Press the function key for
The call party is parked. The LED of the function key is red (Mitel 6910 SIP only).
Notes:
The display returns to idle. The person you talked to will remain parked until the
person puts down the handset.
Recommence conversation with the parked call party:
1. Press the function key for Park.
2. Hand-free mode is activated.
3. Pick up the handset.
4. You are connected via the handset.
Enquiry call during a call
You can talk to someone else briefly while you are already on an active
call. Then you can resume your conversation with your original call part-
ner.
The Enquiry function, enables you to call someone else in the middle of a
call, placing your original call partner on hold. You can make enquiry calls
to both internal and external users.
Setting up an enquiry call (while you are in a call):
Press a free line key (select the horizontal navigation key, if necessary).
Enter the call number of the enquiry partner and press the
Enquiry call party is called; the first call is placed on hold.
Notes:
• You can also set up an enquiry call by pressing the busy lamp field key to
which you have saved the enquiry call party.
• If the other user does not answer, you can cancel the enquiry call using the
end key and return to the first call using the flashing line key.
1)
from MiVoice Office 400 communication server software version R4.0 SP1
onwards
36
Park
and put down the handset.
Dial
softkey.
Mitel 6905 SIP / Mitel 6910 SIP
Version 1.0/ – R7.0 – 12.2021
Advertisement
Table of Contents
