Mitel 6940 Quick Reference Manual

Quick Reference Guide
QUICK REFERENCE GUIDE

MiGuest Station

Getting Started

After the MiGuest application is successfully installed, the following screen is displayed
on the 6940 MiNet phone.
When the phone is in the idle state or a call is on hold, pressing the Guest Services
softkey displays the Client Suite screen.
© Copyright 2019, Mitel Networks Corporation. All Rights Reserved.
The trademarks, service marks, logos and graphics (collectively "Trademarks") appearing on Mitel's Internet sites or in its publications are registered and unregistered trademarks of Mitel Networks Corporation (MNC) or its subsidiaries (collectively "Mitel") or others.
Use of the Trademarks is prohibited without the express consent from Mitel. Please contact our legal department at legal@mitel.com for additional information. For a list of the worldwide Mitel Networks Corporation registered trademarks, please refer to the website:
http://www.mitel.com/trademarks.
Mitel's Power Over Ethernet (PoE) Powered Device (PD) products are covered by one or more of the U.S. patents (and any foreign patent counterparts thereto) identified at Mitel's website: www.mitel.com/patents. For more information on the PD patents that are licensed,
please refer to www.cmspatents.com.
MiGuest displays automatic screen pop-ups on incoming calls. The following figure
shows the core sections of the MiGuest application main screen displaying the guest
details when there is an incoming call and before the call is connected.
The following figure shows the core sections of the MiGuest application main screen
displaying guest details when a call is connected.