Table of Contents
Advertisement
30 PRODIGIT
Chapter 2 Installation
2-1 Inspection
The 34000A Series high power load was carefully inspected before shipment. If instrument damage
has occurred during transport, please inform Prodigit's sales and service office or representative.
Your 34000A Series high power load was shipped with a power cord for the type of Terminal blocks
used at your location. If the appropriated cord was not included, please contact your nearest
Prodigit sales office to obtain the correct cord. Refer to "check line voltage "to check the line voltage
is 100V~230Vac.
2-2 Check line voltage
The 34000A Series high power load can operation with 100 Vac ~230Vac input as indicated on the
label on the rear panel.
Make sure that the factory check mark corresponds to your nominal line voltage. Skip this procedure
if the label is corrected marked.
2.2.1.
With the 34000A Series load power OFF, disconnect the power cord.
2.2.2.
Refer the drawing on the rear panel of 34000A Series high power load in Fig 2-1.
Fig 2-1 34000A Series AC Input Connection
Advertisement
Table of Contents
