The Description Of Abbreviation; Communication Interface Programming Command Syntax Description; Table 4-9 Gpib Command Terminator - Prodigit 34000A Series Operation Manual

4-5. The description of abbreviation

SP:Space, the ASCII code is 20 Hexadecimal.
；:Semicolon, Program line terminator, the ASCII code is OA Hexadecimal.
NL：New line, Program line terminator, the ASCII code is OA Hexadecimal.
NR2：Digits with decimal point. It can be accepted in the range and format of ###.#####.
For Example：
30.12345, 5.0
The description of GPIB programming command syntax.

4-6. Communication Interface programming command syntax description

{ } : The contents of the { } symbol must be used as a part or data of the GPIB
command, it cannot be omitted.
[ ] : The contents of the [ ] symbol indicts the command can be used or not. It
depends on the testing application.
| ： This symbol means option. For example〝LOW|HIGH〞means it can only use
LOW or HIGH as the command, it can choose only one as the setting command.
Terminator
after send the GPIB command, the available command terminator characters
which can be accepted in 34000A Series mainframe is listed in Table 4-9.
Semicolon〝;〞:
allows you to combine command statement on one line to create command
message.
You have to send the program line terminator character
:
LF
LF WITH EOI
CR,LF
CR,LF WITH EOI

Table 4-9 GPIB COMMAND TERMINATOR

The semicolon〝;〞is a back-up command, the semicolon
34000A Series Operation Manual 123