Burkert 8756 Batch Operating Instructions Manual page 23

Type 8756 Batch
Technical data
Minimum temperature rating of the
cable to be connected to the field
wiring terminals:
MDC Industrial Ethernet with on/off valve Type 6757
Operating voltage
Power consumption
Typical power consumption
Communication interface
Electrical connections
Minimum temperature rating of the
cable to be connected to the field
wiring terminals:
MDC büS/CANopen with on/off valve Type 6757
Operating voltage
Power consumption
Typical power consumption
Communication interface
Electrical connections
Minimum temperature rating of the
cable to be connected to the field
wiring terminals:
MDC Industrial Ethernet for modular actuator
Operating voltage
Power consumption
PWM signal (actuator output)
Analog output (actuator output)
Digital output (actuator output)
Communication interface
75 °C
24 V DC ±10 %
residual ripple < 2 %
< 4,5 W
4,5 W for water and at a flow rate of 120 kg/h
Industrial Ethernet: PROFINET, EtherNet/IP, EtherCAT, Modbus TCP
M12 plug 5-pin A-coding
2 M8 socket 4-pin D-coding
service büS interface
75 °C
24 V DC ±10 %
residual ripple < 2 %
< 4,5 W
4,5 W for water and at a flow rate of 120 kg/h
büS and CANopen. The communication type can be chosen with the
Bürkert Communicator software.
M12 plug 5-pin A-coding
75 °C
24 V DC ±10 %
< 2 W
PLUS < 30 W (power consumption of the actuator)
Open collector, 22 kΩ-pull-up resistor and free wheeling diode, both
to 24 V
0-10 V analog signal
5 V digital signal
Industrial Ethernet: PROFINET, EtherNet/IP, EtherCAT, Modbus TCP
23