Table Of Contents - ESDEC FLATFIX FUSION Manual

CONTENTS
1. Introduction
2. General installation requirements
3. Product description
4. Parts overview
4.1 Exploded-view
4.2 List of parts
5. Preparation for installation
5.1 Checking if you have all necessary tools and accessories
5.2 Determining and measuring the position of solar panels
5.3 Cleaning the roof
6. Installation
6.1 Mounting roof support to bases
6.2 Mounting additional roof supports (option)
6.3 Mounting TPO Protective Mat (option)
6.4 Equipotential bonding and mounting base profile to bases (option)
6.5 Coupling FlatFix Fusion segments
6.6 Mounting additional roof supports
6.7 Positioning FlatFix Fusion segments
6.8 Mounting ballast containers
6.9 Mounting MLPE devices & cables
6.10 Mounting cable exit guides and cables (option)
6.11 Placing ballast
6.12 Installing 1
6.13 Equipotential bonding and installing other solar panels
6.14 Mounting and equipotential bonding wind deflector rear
6.15 Equipotential bonding touchable metal parts (option)
6.16 Equipotential bonding multiple rows (option, see also section 7.3)
6.17 Equipotential bonding ballast containers (option)
6.18 Mounting wind deflector left/right
7. Bijlage
7.1 Dimensional variants
7.2 Mounting wind deflectors left/right with cable exit guides
7.3 Schematic representation of earthing, equipotential bonding
and lightning protection
7.4 Ballast configurations
THIS INSTALLATION MANUAL MUST BE KEPT IN A SAFE PLACE FOR FUTURE USE!
For the duration and conditions of the warranty, we recommend you to contact your supplier.
We refer to our General Terms and Conditions of Sale and Delivery, which are available on the website www.esdec.com.
The manufacturer declines all responsibility for damage or injury resulting from failure to follow this installation manual carefully or failure
to exercise the usual care when transporting, mounting and using the FlatFix Fusion mounting system.
Due to ongoing improvements, the product may differ in detail from what is described in this manual. This means that the instructions
given are only intended as a guide for the installation of the product referred to in this manual.
The manufacturer cannot accept liability for any errors in this manual or their consequences.
In addition, all rights are reserved and no part of this manual may be reproduced in any form whatsoever.
Rev. 08.08.23
solar panel
st
MANUAL FOR FLATFIX FUSION MOUNTING SYSTEM FOR FLAT ROOFS
page
1
1
3
3
3
4
5
5
6
6
7
7
7
7
8
9
10
11
11
13
14
15
16
17
18
20
21
22
23
24
24
25
26
29