Cleaning The Grill Burners - DCS BH1-48RI-N User Manual

Grill burners should be removed regularly for cleaning and to check for blockages from
food residue and insects. Always turn off gas supply before removing and cleaning burners.

CLEANING THE GRILL BURNERS

1. Remove grates and
radiant trays. Use a flathead
screwdriver to loosen clamps,
then carefully lift burner up and
out of grill.
Shake gently to remove debris.
Clean exterior with a grill brush.
2. Use a flashlight to check if
burner inlet is blocked. If so,
use safety pin or straightened
paper clip to unblock inlet and
holes along burner tube.
You can unblock gas jet inside
front of grill if required.
3. Refit burner so inlet is
centered on gas jet, then lower
burner onto mounts at rear.
Ensure it is level and secure.
Take care not to damage
ignitor.
Burner must be properly
located to ensure safe
operation.
31