Check Burners - DCS BE1-48RCI Installation Manual

Each burner is tested and adjusted before shipping. It should not be necessary to make
adjustments however local gas variations and altitude may effect burner performance.
dcsappliances.com/us/trade-resources/specify
30

CHECK BURNERS

min
3/8"
10mm
1. Remove the grill grates
and radiant trays to expose
the burners.
2. Light the burner. Refer to the
user guide for guidance.
3. Flames should be blue and
stable. A yellow flame indicates
max 1 1/2"
insufficient air. A noisy flame
38mm
that lifts away from the burner
indicates too much air.
Light the burner to
recheck flames.