DCS BH1-48RI-N User Manual page 22

USING THE SIDE BURNERS (SOME MODELS ONLY)
1. Remove rotisserie rod and the
side burner cover. Take care if
grill is in use, as rod and cover
may be hot.
Lighting the side burners
2. Light one burner at a time.
Push and turn dial to to
HI
ignite.
The ignitor will make a clicking
sound. Once lit, turn dial to
desired heat and release.
If burners do not light, wait
5 minutes for gas to dissipate,
then start again or light
manually.
Manual lighting
Turn dial to allow gas to flow.
At the same time, hold a long
match or lighter to the side of
the burner.
When burner ignites, turn dial
to desired heat setting, and
release it.
22