Object Description; Objects For Parameterization - Beckhoff EP4378-1022 Manual

6.3

Object description

6.3.1

Objects for parameterization

Indices 8100, 8110, 8120, 8130: AI Settings Ch.x
• 8100 AI Settings Ch.1: Settings for the analog input at X01
hex
• 8110 AI Settings Ch.2: Settings for the analog input at X02
hex
• 8120 AI Settings Ch.3: Settings for the analog input at X05
hex
• 8130 AI Settings Ch.4: Settings for the analog input at X06
hex
Access rights: read/write
Subindex Name
(hex)
01 Enable user scale
02 Presentation
06 Enable filter
07 Enable limit 1
08 Enable limit 2
0A Enable user
calibration
0B Enable vendor
calibration
0E Swap limit bits
11 User scale offset
12 User scale gain
13 Limit 1
14 Limit 2
15 Filter settings
17 User calibration offset Offset value for the User calibration [} 54].
18 User calibration gain
Indices 810D, 811D, 812D, 813D: AI Advanced Settings Ch.n
• 810D AI Advanced Settings Ch.1: Settings for the analog input at X01
hex
• 811D AI Advanced Settings Ch.2: Settings for the analog input at X02
hex
• 812D AI Advanced Settings Ch.3: Settings for the analog input at X05
hex
• 813D AI Advanced Settings Ch.4: Settings for the analog input at X06
hex
Access rights: read/write
Subindex Name
(hex)
11 Input Type
12 Scaler
17 Low Range Error
18 High Range Error
EP4378-1022
Description
Enabling User scaling [} 55]
Select the Data format of the measured values [} 47].
Enabling Filter [} 48].
Enabling the Limit value monitoring [} 51] for the limit value
"Limit 1".
Enabling the Limit value monitoring [} 51] for the limit value
"Limit 2"
Enabling User calibration [} 54]
Enabling Vendor calibration [} 53].
Invert comparison operation of the Limit value monitoring
[} 51].
Offset value for the User scaling [} 55].
Gain value for the User scaling [} 55].
Limit value "Limit 1" for the Limit value monitoring [} 51].
Limit value "Limit 2" for the Limit value monitoring [} 51].
Select Select filter type [} 49].
Gain value for the User calibration [} 54].
Description
Set Measuring range [} 43].
Nominal and technical measuring range [} 44].
Error thresholds [} 46].
The Process image [} 24] is set if the measured value is
smaller than this parameter.
Error thresholds [} 46].
The Process image [} 24] is set if the measured value is
smaller than this parameter.
Version: 1.4
CoE parameters
Unit Data type Default
- BOOLEA FALSE
N
- UINT8 0
- BOOLEA FALSE
N
- BOOLEA FALSE
N
- BOOLEA FALSE
N
- BOOLEA FALSE
N
- BOOLEA TRUE
N
- BOOLEA FALSE
N
- INT16 0
- INT32 65536
dec
- INT16 0
- INT16 0
- UINT16 2
- INT16 0
- INT16 16384
dec
Unit Data type Default
- UINT16 2
- UINT16 0
- INT32 -32768
- INT32 32767
dec
dec
69