Chipping - P.Lindberg 9068995 Manual

CHIPPING

This chipper is designed for chipping trees and branches with a diameter of 10 cm (4") and smaller.
Never use this machine for any other purpose as it may cause serious injury.
PROCESSING 10 cm (4") OR SMALLER TREES AND BRANCHES
•
The chipper can process dry or green material.
•
Feed the branch into the chipper's hopper.
•
Keep the branch at the same angle as the chipper hopper.
•
As the branch becomes short and is inside the chipper hopper, finish processing it by
pushing it into the chipper with the next branch if needed.
•
If branches are 5 cm (2") or larger in diameter, feed only one branch at a time into the chipper.
•
If branches are smaller than 5cm, more than one at a time can be fed into the chipper.
•
Green branches process easier than hard wood.
•
Make sure protective gloves are worn when feeding the chipper.
CHIPPING
•
Use common sense when using the chipper.
•
Learn to recognise the change in the sound of your machine when it is overloaded.
•
Familiarise yourself with successful operating conditions and avoid those that can overload and
damage the machine.
•
If the machine becomes jammed by overloading or any other cause, stop the machine
immediately.
•
If you jam the machine and do not stop the engine it can:
- Burn the belt
- Ruin the clutch
THIS DAMAGE CAN BE COSTLY AND IT IS NOT COVERED UNDER WARRANTY. FOR THIS
REASON, IT IS IMPORTANT THAT YOU IMMEDIATELY SHUT OFF THE MACHINE IF IT
BECOMES JAMMED.
•
Only operator experience can tell you how quickly trees and branches should be fed in.
•
Check that the blade drum can rotate freely before starting the chipper.
•
Visually inspect the chipper blade for damage before each use.
•
Check the condition of the blade, the counter blade and the nuts and bolts that hold the blade in
place before each use.
•
Use a spade, rake, or long-handled tool to move the pile of processed material. Never use your
hands or feet.
P. Lindberg A/S
Tlf: 70212626
23
Sdr. Ringvej 1
DK-6600 Vejen
MAN 9068995 EN V1
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk