P.Lindberg 9068995 Manual page 119

−
Never allow children to operate the chipper.
−
Do not overload the machine or attempt to chip material thicker than 100 mm. This may result in
personal injury or damage to the machine.
−
Never operate the machine at high transport speeds or on hard or slippery surfaces.
− Never allow bystanders near the machine while it is running.
−
Only use accessories approved for this machine by the manufacturer. Read, understand, and follow
all instructions provided with the approved accessories.
−
Only use the machine in daylight. Do not use the device at night or in dark areas where visibility may
be reduced.
−
Use extreme caution when reversing or pulling the machine towards you. NEVER move the machine
while it is running.
−
Do not make any changes to the engine governor setting. The governor controls the maximum safe
operating speed and protects the engine. Overheating the engine is dangerous and will damage the
engine and other moving parts of the machine.
−
Start the engine according to the manufacturer's instructions. Keep hands and feet away from
o inlet and discharge areas.
−
Never lift or carry the machine while the engine is running.
−
Do not operate the machine while under the influence of alcohol, drugs or medication. A clear head
is essential for safety.
−
Do not allow anyone who is not alert to operate this machine.
−
When feeding material into this equipment, be extremely careful that pieces of metal, rocks, or
other foreign objects are not included. Personal injury or damage to the machine could result.
−
Keep area of discharge clear of people, animals, buildings, glass, or anything else that will obstruct
clear discharge, cause injury or damage. Wind can also change discharge direction, so be aware.
−
Do not allow an accumulation of processed material to build up in the discharge area as this will
prevent proper discharge and can result in kick-back from the chipper chute.
−
Do not allow any part of the engine, especially the area around the cooling fins and muffler, to
become clogged with processed material, leaves, oil, grease, or any other combustible materials.
−
Do not run the engine with the air filter or carburettor air intake cover removed, except for
adjustment. Removing these parts may cause a fire hazard.
P. Lindberg A/S
Tlf: 70212626
10
Sdr. Ringvej 1
DK-6600 Vejen
MAN 9068995 EN V1
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk