P.Lindberg 9068995 Manual page 127

P. Lindberg A/S
Tlf: 70212626
It is advisable that two people perform this task –
so that one person can hold the chute while the
other attaches the bolts!
Position the discharge chute on the blade box so
that the assembly holes align with the holes in the
discharge chute. Secure using bolts, washers and
nuts.
Please note that the machine is pictured with a
different type of support foot.
Next, attach the slide/extension piece to the chute
using five bolts. Use the two long bolts on the
outside!
Be careful not to drop bolts or screws into the
chute!
Fit the safety bar and secure it with the two pins.
18
Sdr. Ringvej 1
DK-6600 Vejen
MAN 9068995 EN V1
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk